Lake Shore Cryotronics 336 Instrument Driver Readme
To rate this instrument driver, go to the driver download page on the Instrument Driver Network.
1. Overview
Instrument Driver Technology: LabVIEW Plug and Play (project-style)
Supported Language(s): LabVIEW 8.2
Manufacturer: Lake Shore Cryotronics
Interface(s): GPIB, Serial, Ethernet
Supported Model(s): 336
Model(s) Tested: 336
Firmware Revision(s) Tested: Main Version 1.0, Input Version 1.0
Certified: Yes
NI Supported: Yes
Source Code Available: Yes
Driver Revision: 1.0.1
Original Release Date: 05/2009
Current Revision Date: 01/2012
2. Required Software
Some software components need to be installed before using this
instrument driver. The minimum versions of these components are listed
below, and can be downloaded from the Download Site.
VISA 3.2 or later
LabVIEW 8.2 or later
For more details, refer to the LabVIEW Help under Help
» Search the LabVIEW Help.
3. Known Issues
Each VI in this driver includes time delays as required by the instrument for stable communication.
Please refer to the Message Flow Control section in Chapter 6 of the Model 336 User’s Manual for detailed information
To report issues or provide feedback about this instrument driver,
please send an email to instrument.drivers@ni.com.
4. Revision History
The latest version of this and other LabVIEW and LabWindows/CVI
instrument drivers can be downloaded at the Instrument Driver Network.
REV 1.0.0, 05/2009
Created by: Rob Welsh, Westerville, OH.
REV 1.0.1, 01/2012
Modified by: NI, Austin, TX.
Lake Shore 336 Configure Heater Output Control Parameters and Acquire Single Reading - On the block diagram the order in the first case statement was changed so the Configure option is the Default case (0).
Lake Shore 336 Write Curve - On the block diagram the order in the case statements was changed so the Configure option is the Default case (0).